c
Important:
Do not touch the sections shown in the illustration. Doing so may prevent normal operation and you may get
smeared with ink.
7.
Put the used maintenance box in the transparent bag that came with the new maintenance box and seal the
bag shut.
8.
Insert the new maintenance box all the way into the printer.
9.
Reattach the cover.
c
Important:
Insert the tabs on the cover into the slots, and then tighten the screw. If the cover is not installed correctly, ink
may leak.
Solving Problems
>
It is Time to Replace the Maintenance Box
>
Replacing a Maintenance Box
235
To Next Page
Loading...
