Essemtec Fox - Page 13

About this Manual
Fox Maintenance © Essemtec AG xiii
0000074/05
/ March 31, 2017
Text Conventions and their Meanings
Various text styles are used in this Maintenance Manual in order to support the readability of the
text or to emphasize the meaning of text segments.
Meaning
Description / Text Style
Example
Parameters and
actual Values
Machine parameters and actual values are
visualized by bold characters and in the same
spelling as in the menu. Also the state of the
parameter is written in the same way.
Set the parameter
Optimization mode to
Maximum performance
Pickup 5 [ms]
Soft Key
Context sensitive function keys are written in
italic and bold. Normally they are shown
together with the respective pictogram.
Press New to create a new
light profile
Menu Key
(Screen)
Starts a submenu. Same style as the Soft Keys.
Production Settings
Check Boxes
Are located anywhere on a screen. They have
same style as Soft Keys.
Select Setup check
Menu Tree
In a text flow the hierarchy of a menu is visu-
alized by using hyphens and bold characters.
Setup - Optimization -
Recipe Splitting
Screen
Screens are written in bold using capital and
small letters.
... on Produce screen
Cross
Reference
Written in blue italic.
see on page ...
Notification
Error
Warning
Appearing in a pop up window providing tips,
instructions and messages. They are written in a
non proportional font.
The following warning
appears:
No components found
to be produced
Note
If a certain subject must be emphasized it is
written as a note.
Note:
Adjust the guide pins
symmetrically