Essemtec Fox - Prerequisites

Preventive Maintenance
4-60 © Essemtec AG Fox Maintenance
0000074/05
/ March 31, 2017
Tool set CAL-SET12 (1)
Tool set CAL-SET13 (2)
Time needed
Schedule around 3 hours for this task (preparation time of 3 minutes included).
4.8.2 Prerequisites
For a safe and efficient maintenance, detailed in this chapter, the following prerequisites have to
be fulfilled:
Production:
• stopped
Machine loading:
• Production Material unloaded
• Feeders on front side removed
• Nozzles, does not matter
Machine operating condition:
• in operation
• machine at maintenance position
Main electrical power:
• connected
Compressed air:
• connected
Machine location:
• does not matter
Schedule around 3 minutes to fulfill these prerequisites (see also chapter 'Tools, Material and
Scheduling' for the overall effort).
Note:
To gain the above mentioned prerequisites, follow the steps described in chapter "Gaining
Prerequisites a" on page 4-62.