Essemtec Fox - Gaining Prerequisits B

Preventive Maintenance
Fox Maintenance © Essemtec AG 4-63
0000074/05
/ March 31, 2017
4.9.2 Gaining Prerequisits b
Stopping Production
Any Tab
Any Menu
Any Submenu
(STOP button)
Unloading Production Material
In case of equipment with conveyor, remove PCB(s) on conveyor input stage.
Produce
Production
Unload PCB
Remove PCB(s) on conveyor output stage.
In case of equipment without conveyor, unload all the PCBs manually.
Unloading Feeders and/or Trays
Remove all feeders and/or trays to unload and clear the feeder racks and the production area.
If using FLX-feeders, draw the feeder out (1) and
lift it slightly (2) to remove. Store them on a
proper place.