Preventive Maintenance
4-6 © Essemtec AG Fox Maintenance
0000074/05
/ March 31, 2017
Schedule around 3 minutes to fulfill these prerequisites (see also chapter 'Tools, Material and
Scheduling' for the overall effort).
To gain the above mentioned prerequisites, follow the steps described in chapter "Gaining
Prerequisites a" on page 4-62.
4.3.3 Used Tape cutting and removing
Cut and remove the used tape
The used tape (inclusive cover tape) from the
feeders should be trimmed on at least a daily
basis or as necessary. Using a scissor or side
cutter, cut the tape(s) at the front of each tape
feeder and remove the tape(s).
The position for cutting varies slightly on
different feeders.
To Next Page
Loading...
