Essemtec Fox - Preventive Maintenance Schedule

Preventive Maintenance
Fox Maintenance © Essemtec AG 4-3
0000074/05
/ March 31, 2017
Chemical Hazard
Some substances used during operation or maintenance (media, adhesives, cleaning agents,
lubricants etc.) may cause health hazards when used without protection. Some substances
may ignite when coming in to contact with hot surfaces or other chemical substances,
therefore avoid any contact of chemical substances with hot surfaces.
Consult and obey the Material Safety data Sheet (MSDS) of the corresponding material and
use protective equipment if necessary.
4.2 Preventive Maintenance Schedule
Task
Daily
Every
Week
Every
Month
After
1 Year
After
2-4
Years
***)Type
*)
Effort
[min]
Used Tape Cutting and Removing
4-6
a
3
Reject Bin Emptying 4-7
a
1
Contaminated Areas Cleaning (only
for dispensing)4-7
a
5
Dispensing Valve Cleaning (The
interval is depending on the
dispensing material)
See separate Manuals on Info Page
a
2-10
Safety Check 4-12
a
5
Bottom Vision Glass Cleaning 4-14
a
1
Cover and Monitor Cleaning 4-14
a
5
Nozzle Cleaning 4-15
a
15
Conveyor Belt Cleaning 4-18
a
5
Feeder and Rack Cleaning 4-20
b
5
Trailing Cable Checking and
Cleaning 4-21
b
3
Production Area Cleaning 4-22
b
4
Linear Motor Magnets Checking
and Cleaning 4-23
b
5
Height Laser Cleaning 4-27
a
1