Preventive Maintenance
Fox Maintenance © Essemtec AG 4-25
0000074/05
/ March 31, 2017
4.6 Monthly Maintenance a
Before starting the monthly maintenance tasks, read carefully the safety information in
the Introduction of Preventive Maintenance on page 4-1.
Have the Startup & Safety manual ready to access the Material Safety Data Sheets (MSDS)
in case of an emergency.
All daily and weekly maintenance tasks are integral part of the monthly maintenance.
Please refer to the appropriate chapters for detailed description.
4.6.1 Tools, Material and Scheduling
For an effective and efficient monthly maintenance, detailed in this chapter, the following
resources have to be provided:
An error free function is only guaranteed with the usage of tools, materials and genuine
parts mentioned in the table below and at the individual tasks. The usage of tools, materials
or parts other than recommended is at the user's own risk and cost. It can result in the
expiration of warranty.
Required Tools / Auxiliary Material / Spareparts
Set of Allen key
Vacuum cleaner. The vacuum cleaner must be conforming to ESD (Electrostatic
Discharge) and must not have a metal attachment nozzle. If it does not conform
with the ESD rules and/or the using of a metal nozzle may result in damage of
system components.
Brush white (20 mm wide) for cleaning purposes
Brush black (9 mm wide) for greasing purposes
Soft and lint-free lens cleaning tissue (must be a tissue specially prepared for
cleaning lenses and other sensitive surfaces). Recommended is the microfibre
eyeglass cloth out of the SP26/MAIN05 Tool-Kit for Maintenance Tasks
Essemtec P&P Head Grease SP26/HG01
Grease Kluebersynth BEM 34-32 (SP26/HG08)
Isopropanol or Ethanol
To Next Page
Loading...
