Essemtec Fox - Page 40

Preventive Maintenance
4-4 © Essemtec AG Fox Maintenance
0000074/05
/ March 31, 2017
Air Maintenance Unit Checking 4-
27
a
1
Optical Measuring System (linear
scales) Checking and Cleaning4-28
a
5
P&P Head Checking 4-29
a
10
Dispense Axes Spindle Cleaning /
Lubricating 4-36
a
10
**) Linear Slider Cleaning and
Lubricating 4-46
c
10
**) Electronic Cabinets Checking
and Cleaning 4-48
c
15
**) Head Maintaining 4-50
c
30
Dispense Axes Linear Guide
Cleaning / Lubricating 4-58
c
10
**) Machine Calibration 4-61
a
180
*) The listed effort does not include preparation time, see time indication for preparation effort in
the appropriate 'Prerequisites' .
**) The yearly and two yearly maintenance can only be carried out by authorized Essemtec
personnel, or customer personnel trained by Essemtec.
***) The type of the maintenance task indicates what prerequisites are required to perform it (e.g.
the machine has to be switched off). Please see chapter 'Steps to gain Prerequisites for
Maintenance' on page 4-62.
Note:
The indicated maintenance intervals are based on a 1-turn-shift of 8 hours on 5 working
days per week.
Increasing the uptime of the machine means that the maintenance intervals must be
adapted accordingly.