Calibration of the Machine
3-2 © Essemtec AG Fox Maintenance
0000074/05
/ March 31, 2017
For better visibility of subjacent functions, covers have been removed or opened before
taking pictures. In standard operating mode all covers have to be in place at any time.
High voltage!
The system must be disconnected from the mains electrical power supply when a high
voltage label is encountered during installation, maintenance or setup.
Hazards or unsafe practices could result in severe personal injury or death.
Only qualified personnel is allowed to carry out any work on the system's power supply.
Never touch any components behind a cover or a door with a 'high voltage' label before the
equipment is disconnected from the main electrical power and locked against re-connecting.
Be aware, even switched off motors can induce a high voltage during manual movement of
any axis (generator principle).
Moving parts!
Moving parts can cause serious injury.
When operating softkeys keep hands, loose clothing and tools clear of all moving parts.
Do not change parameters or operate softkeys unless the resultant action is known.
High temperature!
High temperature can cause severe burns. Keep hands and other parts of the body away
from all parts with a 'high temperature' label.
For servicing, allow these parts to cool before any handling on and around them.
High temperatures can ignite chemical substances. Avoid any contact of chemical substances
with hot surfaces
To Next Page
Loading...
