ETC ION - Using Device List

120 Ion Operations Manual
{Fan Curve} - Used to assign a curve to the scroller fan parameter, which allows for the output
of the fan to be controlled by the intensity of the channel. Curves available for this are the
same used for intensity parameters and cues.
Note: When {Curve} or {Fan Curve} is pressed, a list of the available curves will be dis-
played. Clicking on an available curve will assign it.
{LD Flags}- This field allows channels to contribute to live and dark move flags in the playback
status display. Disabling will prohibit those channel moves from contributing to the live and
dark move flags. This is enabled by default.
{GM Exempt} - Used to exempt the intensity of channels from grandmaster, blackout, rem
dim, and go to cue 0 operations.
{Invert Pan} {Invert Tilt} - A moving light attribute used to invert the output of pan, tilt, or both.
Select either the {Invert Tilt} or the {Invert Pan} button on the CIA.
[2] {Attributes} {Invert Pan} - inverts the output of the pan parameter on channel 2.
{Swap P/T} - A moving light attribute used to exchange pan and tilt levels. Select the {Swap}
button on the CIA.
[2] {Attributes} {Swap} - swaps the pan and tilt parameters for channel 2.
{ColorPath} - A default Color Path can be assigned at the channel level in Patch. That color
path will be used for all of that channel's color fades unless overridden at the cue level. Sub-
masters and manual transitions that use that channel will use the default color path as well.
See Color Path (on page170)
[1] {Color Path} [2] [Enter] - will assign color path 2 to channel 1.
{Scrollers} - An attribute used to change the scroll loaded in a scroller or moving light. Select
the {Scrollers}button on the CIA to display the scroller picker and the scrolls available for your
device. See Using the Picker (on page111)
[2] {Attributes} {Scrollers} -opens the Scroller Picker in the CIA for scroll selection for
channel 2.
{Color Wheels} - An attribute used to change the color wheel loaded in a moving light. Select
the {Color Wheels} button on the CIA to display the wheel picker with the options available for
your device. See Using the Picker (on page111) “More” as shown in the patch display, indic-
ates additional parameter properties are available for the selected device, such as the color
and gobo wheels.
[4] {Attributes} {Color Wheels} - selects channel 4 and opens the wheel picker in the CIA
for color wheel selection.
{Gobo Wheels} - An attribute used to change the gobo wheel loaded in a moving light. Select
the {Gobo Wheels} button on the CIA to display the wheel picker with gobo options available
for your device. See Using the Picker (on page111)
[3] {Attributes} {Gobo Wheels} - selects channel 3 and opens the Wheel Picker in the
CIA for gobo wheel selection.
{Effect Wheels} - An attribute used to change the effect wheel loaded in a moving light. Select
the {Effect Wheels} button on the CIA to display the wheel picker with the options available
for your device. See Using the Picker (on page111) “More” as shown in the patch display,
indicates additional parameter properties are available for the selected device, such as the
color and gobo wheels.
[5] {Attributes} {Effect Wheels} - selects channel 5 and opens the wheel picker in the
CIA for effect wheel selection.