Eventide DIR911t - Save to USB Drive by Call Number; Figure 12: Save Call to USB Drive Screen; Figure 13: Save Call to USB Drive by Number Screen

DIR911T User Guide
38
Save to USB Drive
The save calls to USB drive screen is shown in Figure #12.
SELECT SAVE TYPE:
BY CALL# BY DATE BY FILTER DONE
Figure 12: Save Call to USB Drive Screen
The DIR911t is able to save calls recorded and stored internally to an external USB mass
storage devices (commonly called USB keys or USB flash drives). This screen is used to
select the type of save to perform. “BY CALL #” saves by call number, “BY DATE”
saves all calls that fall within a date range given, and “BY FILTER” saves all calls that
match the current call filter. The unit will save the call(s) to the first USB drive it finds.
Press the DONE soft key to exit this screen.
NOTE: When a call is saved to an external USB key, it is saved with the filename
lineN-YYYY-MM-DD-HH-mm-ss.WAV where N is the line number, YYYY-MM-DD
is the year, month, day, hours, minutes, seconds of the call.
NOTE: When the call is saved all call metadata (date, time, channel, unit, Caller ID
digits, DTMF, etc) are saved as .WAV cue points. If MediaWorks/MediaAgent is
licensed for use on the unit, an additional file named “dir911t-calls.xml” is also created.
Save to USB Drive by Call Number
The save calls to USB by call number screen is shown in Figure #13.
Call# to export: 0000023
SAVE DONE
Figure 13: Save Call to USB Drive By Number Screen
Use the knob to select the call number to save, press the SAVE soft key to save the call.
A status screen will show the progress. Press the DONE soft key to exit this screen.