Eventide DIR911t - Delete User; Configure Line Name; Figure 44: Delete User Screen; Figure 45: Line Naming Screen

DIR911T User Guide
59
Delete User
The Delete User screen is shown in Figure #44.
Select the username to delete:
Username: theuser
DELETE DONE
Figure 44: Delete User Screen
This is screen is used to delete a remote user. The encoder selects the username to delete.
Pressing the DELETE softkey will permanently delete the user from the list of remote
users. Press the DONE softkey to exit the menu.
Configure Line Name
The line naming screen is shown in Figure #45.
Line #1
Line Name: Line 1
CURSOR DONE
Figure 45: Line Naming Screen
This screen provides a way to individually name the lines of the DIR911t. The line name
is predominately used when the DIR911t is configured for centralized archiving or call
browsing (using Eventide’s MediaWorks recorder client). Press the LINE button to
move through the various lines. Turn the encoder to the desired character and press the
encoder to select that character and move to the next position. Use the CURSOR soft key
to reposition the cursor to the beginning of the name. Press the DONE soft key to save
the line name and exit this menu.