DIR911T User Guide
58
Add-On License Key
The Add-On License Key screen is shown in Figure #42.
Enter the 11 digit license key:
............ (Invalid)
CURSOR DONE
Figure 42: Add-On License Key Screen
Use this screen to enter add-on license keys to enable optional enhanced DIR911t
functionality. The encoder selects the character. Push the encoder to advance the cursor
by one position. The CURSOR soft key will reposition the cursor at the beginning of the
key. Once the license key is valid, the display will indicate this. Press the DONE softkey
to record the new key or to exit if the key is invalid.
Add User
The Add User screen is shown in Figure #43.
Enter the new username and password:
Username:
Password:
CURSOR ADD DONE
Figure 43: Add User Screen
Use this screen to add new remote users. The encoder selects the character. Push the
encoder to advance the cursor by one position. The CURSOR soft key will select either
the Username field or the Password field (it will also reposition the cursor to the
beginning of each field). When the Username and Password fields are correct, press the
ADD key to add the user. Press the DONE softkey to exit the menu.
NOTE: The unit is shipped with a default user named “Eventide” with a password of
“12345” (quotes not included). You may use this to initially connect with
MediaWorks/MediaAgent. It is highly recommended that upon adding another user, the
default account be deleted (or, at the very least, the password changed).
To Next Page
Loading...
