DIR911T User Guide
53
disconnect and (if enabled) an immediate reconnect. Press the DONE soft key to exit this
menu.
Date/Time Setup
The date and time setup screen is shown in Figure #36.
Now:19-Jul-05 14:27:36 EDT
Set:19-Jul-05 14:27:22 America/New York
Src:INT
CURSOR SET DONE
Figure 36: Date & Time Setup Screen
This screen is used to set the unit’s time and date. There are many sources to which the
DIR911t can synchronize its internal clock. These include its internal battery backed
hardware clock, Network Time Protocol (NTP) servers, and NMEA GPS serial streams,
and NENA serial streams.
To Next Page
Loading...
