Safety
2
Rivo™ I Controller EN
15
Evoqua Water Technologies GmbH | W3T597263 Issue 01-0624
2.5 Spare parts/components
Trouble-free operation of the unit is only guaranteed if
original spare parts and components are used in precisely
the combination described in this instruction manual. Fail-
ure to observe this instruction may lead to malfunctions or
damage to the device.
2.6 Extensions and modifications
Never attempt to perform any modifications, extensions or
conversions on the device that could impair safety without
the written approval of the manufacturer.
2.7 Electrical power
Only qualified electricians or trained personnel supervised
by a qualified electrician are permitted to perform any
work on electrical components and must do so in accor-
dance with valid electro-technical regulations. During nor-
mal operation, the electronic module and the flow-through
assembly must remain closed. The electronic module
may only be put into operation when the housing is
closed, and must be connected to protective earth. Power
cables must be connected in accordance with the wiring
diagram.
2.8 IT security
The manufacturer offers IT security mechanisms for its
products to support secure system operation. We recom-
mend checking on a regular basis to see what information
is available regarding IT security developments for your
products. Information on this can be found on the Internet.
Moreover, for the safe operation of an installation, it is also
necessary to integrate the automation components into a
holistic IT security concept which comprises the entire
system and is in accordance with the state of the art in IT
technology. Integrated products from other manufacturers
should also be taken into account.
Unsecure connections via the Internet or WLAN are not
permitted.
During commissioning of the device, the factory-config-
ured passwords and user names should be replaced with
individual ones and the user administration enabled.
To Next Page
Loading...
