Evoqua Rivo I - Warnings on the Device; Device ID;Type Plate

1
General notes
EN Rivo™ I Controller
6
W3T597263 Issue 01-0624 | Evoqua Water Technologies GmbH
1.9 Warnings on the device
There is a warning label attached to the device. Read the
warnings through carefully. Do not remove this label. If the
label is missing or illegible, please contact your contrac-
tual partner.
1.10 Device Id/type plate
The type plate is affixed to the device. The type plate iden-
tifies the specific device. Please use or state this informa-
tion if you need service support.
Fig. 1 For example, type plate
1 Device name
2 Series code/model code (e.g. Mod. E10)
3 Sales Order/position/serial number
4 DataMatrix code (contains part/serial number)
5 Safety information and warnings
6 “Read the operating instructions” symbol
7 “Disposal” symbol
Disposal instruction: Device must not be disposed of
with household waste!
See Chapter “Dismantling and disposal”.
8 Manufacturer’s address
9 CE mark (conformity of the device)
UKCA mark (UK Conformity Assessed)
CSA mark (Canadian Standards Association)
Australian approval (RCM - Regulatory Compliance
Mark)
10 Electrical connection data: Supply voltage and supply
output
11 Available inputs and outputs: Supply voltage
12 Article number
4
1 23
11
10
5
6
7
9
8
12