Evoqua Rivo I - Important System Information - Recovery Key

General notes
1
Rivo™ I Controller EN
7
Evoqua Water Technologies GmbH | W3T597263 Issue 01-0624
1.11 Important System Information - Recovery Key -
An “Important System Information“ label is included in the
scope of delivery of the electronic module. This is located
inside the housing.
The “Important System Information“’ label contains
device-specific data and the access data, such as the App
Default for Login User and the Service Default for Login
Service-Center, as well as the recovery key for resetting
the access data.
The label must be kept in a safe place that is not accessi-
ble and protected against unauthorised access.
The access data for the software must be stored securely
in accordance with your IT guidelines and must not be
handed over to unauthorised persons.
If you lose the recovery key and the user administration
access data, please contact your contractual partner.
Recovery Key:
The recovery key is only valid for a specific electronic
module and cannot be transferred to other electronics
modules. The recovery key is used to reset the user admi-
nistration if the access data is lost.
The Service-Center menu can be used to reset the device
to the factory settings and delete the customer-specific
passwords.
See chapter Operation Service-Center.
App Default:
Access data (user/password) for the initial login of the
user.
Service Default:
Access data (user/password) for the initial login in the
Service-Center menu.
See chapter Operation Service-Center.