10
Operation
EN Rivo™ I Controller
80
W3T597263 Issue 01-0624 | Evoqua Water Technologies GmbH
10.8 Service-Center
System information can be called up and service func-
tions carried out via the Service Center .
Only certain persons can access the Service Center by
entering their user name and password.
Login is requested when a menu in the Service Center is
opened. This login is not identical to the standard device
login.
The standard device login on first opening the Service
Center is:
User: service
Initial password: service
Following initial login, the user is prompted to change the
password. The password must be saved in a safe place.
If it is lost, it can be reset in the Service Center with the
Recovery Key (see Chapter Resetting a password)
There are two ways to open the Service Center:
1 Switch the electronic module on, the device boots.
symbol appears briefly on the bottom right of the
screen.
2 Click the symbol. Service Center opens.
3 Select menus.
OR:
1 Click the symbol (system menu).
2 Select System information menu.
3 Click Service Center.
4 Select menus.
Interactive menu navigation.
.
To Next Page
Loading...
