6
Description and function
EN Rivo™ I Controller
44
W3T597263 Issue 01-0624 | Evoqua Water Technologies GmbH
6.16 Interfaces
red flashing STOP,
TIMEOUT
Module has switched to
stop mode due to a
communication interrup-
tion after a timeout has
expired.
If this state occurs, com-
munication with the con-
trol unit has been
unexpectedly interrup-
ted.
blue flashing UPDATE Module is in update
mode. Firmware update
is being carried out.
LED Status Modus Description
WARNING
Danger due to inadequately qualified personnel
Possible consequence: fatal or serious injury and signif-
icant material damage.
• To ensure safe operation and prevent serious injury,
the device must be installed by trained and autho-
rized specialist personnel.
NOTICE
• See Chapter Design of the HMI and the Backboard.
• For more detailed information, please refer to the
installation manual “Rivo™ communication inter-
faces.” You can request this installation manual from
us or download it from our homepage.
• The firmware update can be downloaded free of
charge from our homepage.
To Next Page
Loading...
