Evoqua Rivo I - Rivo Com-Board 485 (Optional)

Technical data
4
Rivo™ I Controller EN
25
Evoqua Water Technologies GmbH | W3T597263 Issue 01-0624
4.3 Rivo™ Com-Board 485 (optional)
Rivo™ Flex Mod 2AO-mA
Article number W3T557912
Description mA signal output module, 2-channel
Analog outputs (only if
Rivo™ Flex Mod 2AO-mA
is used)
• 2-way mA output module 0/4 to 20 mA
• Freely configurable signal assignment via menu
• Load max. 500 ohm, accuracy < 0.5 % FS
• Integrated load monitoring
• Galv. isolated up to 50 V relative to earth
Rivo™ Com-Board 485
Article number W3T583003
Interface RS485 interface with Wallace & Tiernan protocol for connection to OPC server or control
system for data visualization