Evoqua Rivo I - Safety Functions; Status LED States

Description and function
6
Rivo™ I Controller EN
43
Evoqua Water Technologies GmbH | W3T597263 Issue 01-0624
6.14.5 Safety functions
Various safety functions are integrated to ensure system
safety and minimize the risk of accidents:
• alarms freely configurable
• external STOP for dosing (depending on the configu-
ration of the digital inputs)
• password protection
• safe manual mode stops dosing if the flow rate is too
low or external stop in manual mode
6.15 Status LED states
The Rivo™ Flex modules use LEDs to provide information
about the operating status of the module.
LED Status Modus Description
white illuminated BOOT Only displayed briefly
during booting. Module
restarts.
red illuminated STOP Module is in stop mode.
No outputs active, or
output based on Stop-
Behavior.
green illuminated RUN The module is in run
mode. All outputs are
active and are activated.
This is the normal state
during operation.