S2000 Elite - User's Guide
035-00707 Revision 1
106
Performing the Web Software Upgrade
If updating both the System and the Web Software, the System Software needs to be
updated first
The Web Software can be uploaded using the Web UI in two ways:
1. Directly transferring a local .BIN file that is stored on your device
2. Using the Web UI to access a connected SD card
Using a local file on your device
Web Software Direct Upload
Page
1. Upload file dialog box to
select file from your device's
local storage
2. Upload button to upgrade
the Web Software
The Web Software direct upload page is found by navigating to http://[your-host-
name-or-ip]/index.htm and clicking the "Web GUI Upgrade" button, or directly with
the following link: http://[your-host-name-or-ip]/upload.htm
1. Power on your S2000 Elite unit and ensure the network cable is connected
2. Using your computer/mobile device browser, navigate to the S2000 Elite Web Software
Upgrade page
3. The page will show an upload file dialog box, click on the box to select an appropriate
.BIN file
4. Click on the upload button and the upload should take a few seconds
5. If the upload is successful, a success message will be displayed, otherwise, retry the
upgrade
6. There is no need to reboot the unit after the upgrade completes
Your Web Browser Cache must be cleared to view the new Web Software.
To Next Page
Loading...