Excelitas Technologies OmniCure S2000 Elite User Manual

S2000 Elite - User's Guide
035-00707 Revision 1
86
detected by the
system
• It is available as a
Normally Open
contact
Input
Virtual Contact (VI)
1 to 32
• The contact
represents an input
that is virtualized, and
thus does not exist
physically but only in
the context of
StepCure profiles
• There are 32
available virtual
inputs to use, which
are used to gate
steps as required
• These inputs are
available as Normally
Closed/Normally
Open contact
• See Virtual Inputs
and Outputs for more
details on how to use
the virtual
inputs/outputs
Input
Counter Done (CTD)
N/A
• The counter done
input indicates when
a StepCure counter
has accumulated to
the final repeat value
• The input is available
as a Normally
Closed/Normally
Open contact
Output
Channel 1/2/3 (C1/C2/C3)
N/A
• This output is a
physical output that
can be used by the
process line to
control external
equipment
• This output can be
latched

Excelitas Technologies OmniCure S2000 Elite Specifications

General

Brand	Excelitas Technologies
Model	OmniCure S2000 Elite
Category	Industrial Equipment
Language	English