Signal Path Building Blocks
The discrete signal paths (mic/line input, virtual return input, and line output) can be
individually loaded with pre-configured, modular templates called building blocks. These
blocks are designed for specific microphones, source devices or speaker destinations
and can greatly streamline initial configuration. The blocks are configurable and are more
versatile than a global template.
The building blocks are loaded to a selected input or output by clicking the signal path
label to open the building blocks dialog box.
Figure 64. Building Blocks
Slightly different dialog boxes are available according to the selected signal path, mic/line
input, virtual return input, or line output.
DMP128 • Software Control 105
To Next Page
Loading...
