Extron electronics DMP 128 - Windows-Based Program Control; Installing the DSP Configurator Program

Windows-based Program Control
The DSP Configurator Control Program is compatible with Windows XP, WindowsVista,
and Windows7, and provides remote control of the input gain/attenuation, output volume
output adjustment, and other features.
DSP Configurator can control the DMP128 by any of the three control ports, RS-232,
USB, or LAN.
Updates to this program can be downloaded from the Extron website at
www.extron.com.
Installing the DSP Configurator Program
The program is contained on the Extron Software Products disk.
Install the software as follows:
1. Insert the disk into the drive.
2. Click the Software tab or software icon. The software page opens.
NOTE: If the DVD setup program does not start automatically, run Launch.exe
from the DVD ROM directory using Windows My Computer.
Figure 9. DVD Software Menu
DMP128 • Software Control 13