Extron electronics DMP 128 User Manual

Dante Device Discovery
The Tools menu also provides a way to locate other Dante devices on your network. Once
the device is named (see Dante Network Audio Setup on page113), it can easily be
identified as a Dante host from any other Dante device.
To locate Dante devices on an audio network:
1. Select Tools>Device Settings. The
Device Settings dialog opens.
2. Select the Dante Device tab.
3. Dante devices are found by either:
a. Entering the name in the AT name: field,
-or-
b. Click Search for Dante components
to start a search.
The search may take a few minutes.
As new devices are discovered, they are listed
in the window.
4. If you are using the EXP port to connect to
a nonAT DMP128, check the Use Extron
Expansion Bus for channels 41-56 box
(see Using the Extron Expansion Bus with
DMP128AT Devices on page125).
5. Click Apply or OK.
DMP128MASTER
Dante Device
Search for Dante Components
To identify your AT component, enter the
name below or click the button below to
search your local network.
AT name:
DMP128 • Software Control 115

Extron electronics DMP 128 Specifications

General

Brand	Extron electronics
Model	DMP 128
Category	Processor
Language	English