Extron electronics DMP 128 User Manual

6. The new mic configuration is now a building block used to quickly configure new
devices.
A new configuration can also overwrite existing templates.
To Overwrite an Existing Configuration:
1. Click in the input number box.
2. In the dialog box that opens, select the Add Block icon in the upper left.
3. In the Add a Building Block dialog box, type an existing name for the new device.
4. Select a folder for the new device (see above).
5. Click Add.
DMP128 • Software Control 108

Extron electronics DMP 128 Specifications

General

Brand	Extron electronics
Model	DMP 128
Category	Processor
Language	English