Fairlight Xynergi - Fixed Level Monitoring

User Manual XYNERGI TACTILE CONTROLLER February 16, 2010
Xynergi Media Production Centre Page 16
Step 4 Release the Dim button
Fixed Level Monitoring
Sometimes the monitoring environment must be set to a standard level, and not changed. This is
called Fixed Level monitoring.
The
Dim button is used to fix the CR monitor level. When fixed, it is unaffected by the rotary pot.
To turn on Fixed Level monitoring:
Step 1 Stop the transport
Step 2 Hold down the BLUE key
Step 3 Press the
Dim button
To set the level for Fixed monitoring, first set up an SPL meter at an appropriate position.
Step 1 Stop the transport
Step 2 Hold down the BLUE key
Step 2 Hold down the
Dim button
Step 3 Turn the Jog Wheel. The level changes, and is shown in the Pad. Adjust to match the
required SPL level.
Step 4 Release the
Dim button
Step 2 Release the BLUE key