User Manual USING THE FAIRLIGHT FADER SIDECAR February 16, 2010
Xynergi Media Production Centre Page 231
Step 1 Press the Map key.
Step 2 Press the
CALL key of the first fader in the range.
Step 3 Hold down the first selection key in the range and double press the last selection key.
The paths selected will replace the paths previously assigned to the sequence of faders starting
with the fader selected.
Mapping Link Groups
If a member of a link group is selected to map to a fader, only the link group master is assigned. If a link
group is included in a range, the group takes up only one fader.
Inserting and Deleting Faders
When the Map key is pressed the map menu is displayed in the LCD. Press the Insert key to insert a
path at the current fader position. Press the
Delete key to delete the current path from the fader set.
Press the
Blank key to leave the current fader un-mapped.
Holding Faders
To temporarily retain a selection of channels in their current fader positions when recalling a new fader
set, simply touch and hold the faders while pressing a fader set key. The existing channels will
temporarily replace those in the new fader set.
Press the fader set key without holding a fader, to resume the normal fader set.
To Next Page
Loading...