User Manual HOW TO … February 16, 2010
Xynergi Media Production Centre Page 50
Using the Name Menu
Press the name button to display a selection of all tracks. Select the one(s) whose clip names you
want to change.
To rename clips, they must be touching the cursor, or wholly inside the range. In either case they
will be coloured Red.
Press the
clip soft key to display the name dialog. Use the QWERTY keyboard to type the name,
then press
ENTER or click OK to finish. Press exit to leave the Name menu.
Record menu
Overview
The record menu gives you some recording shortcuts.
These include record head, record clip, record here and record again. These are explained in the
next step.
Get Ready
Many record menu commands use a Pre-Roll. The Pre-Roll time can be set in the ADR menu
(press the green
Record Megamode button then ADR, then use the on-screen dialog).
Using the Record Menu
Hold down the Record button in the transport section (lowest row on the console).
The Pad displays the Record Menu soft keys.
head prerolls, then punches in at the nearest clip head on the selected track
clip prerolls, then records the length of the nearest clip on the currently selected track
here prerolls, then punches in at the current position
range prerolls, punches in at From and out at To. This command is shown only when there is a
range.
again prerolls, then repeats the last recording you made
Punch individual
Overview
The Record button punches all armed tracks into and out of record.
What if you want to punch individual tracks in and out, without affecting others?
Using the track arming keys, you can have individual control of which tracks are in record.
Get Ready
Press the green Record Megamode button to access recording functions.
Patch inputs to a number of tracks, but don’t arm them yet (see How to Recording Patch
Inputs for details).
To Next Page
Loading...