User Manual HOW TO … February 16, 2010
Xynergi Media Production Centre Page 101
Press the cut button.
Please press the
range button until it is OFF.
Operation
Getting the right location, track selection and view use at least half of your editing time. This can
be speeded up as follows:
Jog Speed: hold down
Ctrl or SHIFT or both to jog ever faster.
Track Selection: hold down
Track up/down while jogging.
Time Zoom: hold down
Zoom while jogging.
Track Zoom: hold down
Ctrl and Zoom while jogging.
Locate the transport so that the cursor crosses the middle of a clip. Make its track the only
selected one. (If necessary, use the
Bank key.) The target clip should now be the only red clip on
the screen. Red means ready to edit.
- Hold down
Track and press cut clip / head / tail. Keep holding while turning the Jogger
Wheel to move to another track. Release
Track to drop the cut clip.
- Press and hold
cut clip. Jog forward and release cut clip to drop the cut clip. You can do the
same with
copy, slip and trim.
These moves feel awkward at first, but remember your first mouse click-and-drag? With practise
you'll become a virtuoso editor!
To Next Page
Loading...