2. Commissioning
2-11
Festo P.BE-CPX-PNIO-EN en 1407c English
Pneumatic modules of type M PA-P or M PAF-P and V PPM
are among the analogue modules. Obser ve the sequence
of the modules in addressing or I/O mapping (see
Tab. 2/9).
Additional information on the pneumatics can be found in the
corresponding pneumatics descriptions Document over-
view “Descriptions of th e CPX terminal” in the CPX system
description (P.BE-CPX-SYS...).
The descriptions for the pneumatic valve terminal (Midi/Maxi,
CPA, MPA and V TSA/VTSA-F or ISO) contain the address as-
signment within the pneumatic modules.
Informatio n about pneumatic interfaces and pneumatic mod-
ules can be found in the descriptions of the input/output
modules P.BE-CPX-EA-… and P.BE-CPX-AX-...
To Next Page
Loading...
