FISCHER FT90 - Channels 1 to 3

FISCHER Mess- und Regeltechnik GmbH Operation | 5
BA_EN_FT90 53/108
5.5.1 Channels 1 to 3
The configuration of the channels is largely the same for all versions. However,
note the following:
2-channel version 3-channel version
Channel 1 Temperature Channel 1 Differential pressure
Channel 2 Humidity Channel 2 Temperature
Channel 3 N/A Channel 3 Humidity
Temperature/humidity
2-channel version
The configuration of the channels for the temperature and humidity takes place
in the same way. Here, only the parameters for the first channel are shown.
Path: \Configuration\Channel 1
Level: 2
\...\Channel 1
1 2 3 4
Measurement C1
Number format C1
Colour change C1
Back
A
A
U
A
E
Fig.72: Channel 1
Menu name Description
Measurement C1 A The input of the measuring channel is
configured with this menu.
Number format C1 A The decimal places for the display of
the measured values for the measuring
channel are set in this menu.
Colour change C1 A The colour change for the measuring
channel is defined in this menu.
Back E This is the menu exit point. It takes you
back to the configuration menu.