Operator‘s Manual FERITSCOPE
®
FMP30 Page 121
Evaluation
8.1.1 Documenting the Block Result With a Printer
Corresponding to the settings in Service menu/Print/Block result (
10.5.3 ‘Block Result’, beginning on Page 162), pressing BLOCK-RES al-
lows for the block result of the current block to be printed with date and time
stamp “automatically” or “on request” if a printer is connected and pow-
ered up.
If there are no readings in the current block, pressing BLOCK-RES will not
result in a printout of the block result, instead the block result of the last
closed block will be displayed.
When making measurements with a fixed block size, a printout of the re-
spective block result occurs automatically upon the closing of a block if a
printer is connected and powered up.
Corresponding to the settings of the block result mode made in Service func-
tions/Evaluation ( 10.8 ‘Storage Mode’, beginning on Page 184), ei-
ther the “short” ( Fig. 8-1) or the “long” ( Fig. 8-2) version will be print-
ed.
Fig. 8-1 Printout of a short block result (example)
If outlier rejection is enabled, recognized outlier measurements are
not included in the evaluation.
Application No. 0 Block No.: 3
n= 1 fe = 10.4%
n= 2 fe = 10.4%
n= 3 fe = 10.4%
n= 4 fe = 10.3%
n= 5 fe = 10.2%
FISCHER FERITSCOPE FMP30 25.07.08
Appl.No. 0 -- Block result --
Block No.: 3 24.07.08 23:10
Mean value fe. = 10.33 +/- 0.13%
Std. dev. s = 0.10% n = 5
To Next Page
Loading...