Fisher FERITSCOPE FMP30 - Transfer of the Measurement Data to the Computer

Page 128 Operator‘s Manual FERITSCOPE
®
FMP30
Evaluation
8.2.2 Computed Parameters - Final Result
FERITSCOPE FMP30 Instrument type:
2008-06-27 Current date
Product .....
Name .....
Appl. No. Number of the Application
-- Final result -- Result type
from ... to ... Date and time of the last block closure of the first and
the last block or the current date and the current time
(if the last block is not yet closed).
Mean value Fe./Fe.. Mean value/Mean value of the block mean values
with a 95% confidence interval
Std dev. s Standard deviation
Est.StdDev. Estimated standard deviation (only specified with
fixed block sizes).
n Number of evaluated readings
ni Block size (number of readings per block)
Std. dev. sa Standard deviation sa (is specified only if the spread
of the mean values cannot be explained from the
spread within the blocks according to a variance anal-
ysis).
nBl Number of evaluated blocks
COV Coefficient of variation
Smallest value/
Smallest block
Lowest reading (Minimum)/
lowest block mean value
Highest value/
Highest block
Highest reading (Maximum)/
highest block mean value
LSL/USL Upper / lower specification limit
cp / cpk Process capability index
s^ Estimated value for the standard deviation