Fisher FERITSCOPE FMP30 - USB Connection to a PC; Installing the USB Drivers

Operator‘s Manual FERITSCOPE
®
FMP30 Page 127
Evaluation
Fig. 8-5 Printout of a final evaluation (example)
If tolerance limits are enabled and measurements were made with the fixed
block size, additional parameters will be output ( Fig. 8-6).
Fig. 8-6 Printout of a final evaluation with fixed block size and tolerance limits enabled (ex-
ample)
FISCHER FERITSCOPE FMP30 27.06.08
Product ..............................
Name ..............................
Appl.No. 0 -- Final result --
from 27.06.08 11:26 to 27.06.08 11:27
Mean value fe..= 39.84%
Est.StdDev.. Ã^ = 1.88%
largest Block = 10.33%
smallest block= 8.89%
COV = 19.11%
Displayed only
when tolerance lim-
its are enabled
Displayed only
when measure-
ments are made
FISCHER FERITSCOPE FMP30 27.06.08
Product ..............................
Name ..............................
Appl.No. 0 -- Final result --
from 27.06.08 11:12 to 27.06.08 11:23
cp = 0.69 cpk = 0.34 s^ = 0.51
Mean value fe..= 39.84%
Est.StdDev.. Ã^ = 1.88%
largest Block = 10.33%
smallest Block= 8.89%
COV = 19.11%
1 values < LSL ( 10.20% )= 20.00%
0 values > USL ( 10.80% )= 0.00%