Page 126 Operator‘s Manual FERITSCOPE
®
FMP30
Evaluation
8.2.1 Documenting the Final Result with a Printer
Corresponding to the settings in Service menu/Print/Final result
( 10.5.4 ‘Final Result’, beginning on Page 163), pressing FINAL-RES al-
lows for the block result of the current block to be printed with date and time
stamp “automatically” or “on request” if a printer is connected and pow-
ered up.
Only if the tolerance limits are enabled will the number of measurements
that are violating the lower or upper tolerance limits be specified on the
printout of the final result( Fig. 8-5).
FINAL-RES Notes about finishing the final result using
FINAL-RES.
[Delete meas.: DEL]:
Use DEL to delete all readings of the evalu-
ated Application.
[Exit: ENTER]:
To end the final results function
without deleting the readings
use ENTER.
ENTER
Use ENTER to finish the final result func-
tion.
if DEL is pressed first, all readings of the
evaluated Application will be deleted.
The instrument is again ready to make mea-
surements.
Key sequ. /
Action
Detail of the display Explanation
To Next Page
Loading...