Flexitron Webdyn SunPM - Page 158

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
158
Then comes the actual connection to the server starting with alarm synchronisation where applicable:
2021-02-11 14:25:16:Alarms management…
Once this step is complete, the data les are transferred to the server:
2021-02-11 14:25:16:Data acquisition management…
2021-02-11 14:25:16:Sending WPM00BDE4_MODBUS_210211_142503.csv.gz
2021-02-11 14:25:16:Data acquisition management…
2021-02-11 14:25:16:Sending WPM00BDE4_IO_210211_142507.csv.gz
2021-02-11 14:25:16:Sending WPM00BDE4_SUNSPEC_210211_142507.log.gz
Then comes the processing of the conguration les to be sent or received:
2021-02-11 14:25:16:Conguration management…
2021-02-11 14:25:16:Checking WPM00BDE4_cong.ini
2021-02-11 14:25:16:No change
2021-02-11 14:25:16:Checking WPM00BDE4_daq.csv
2021-02-11 14:25:16:Sending local changes
2021-02-11 14:25:16:Remove le
2021-02-11 14:25:17:Checking WPM00BDE4_var.ini
2021-02-11 14:25:17:No change
2021-02-11 14:25:17:Checking WPM00BDE4_IO.csv
2021-02-11 14:25:17:No change
2021-02-11 14:25:17:Checking WPM00BDE4_SunSpec_inverter_SMA_Solar_
Inverter_9301_modbusTCP.csv
2021-02-11 14:25:17:Getting remote changes
2021-02-11 14:25:21:Failed to parse keep open parameter () for device
192.93.121.23:502, slave: 126, use default value true
2021-02-11 14:25:21:Local changes sent WPM00BDE4_daq.csv
The log le indicates that a certain number of les were checked and that no modications were detected.
It then indicates that le “WPM00BDE4_SunSpec_inverter_SMA_Solar_Inverter_9301_modbusTCP.csv”
was modied on the remote server. It is then retrieved, read and imported locally:
2021-02-11 14:25:17:Checking WPM00BDE4_SunSpec_inverter_SMA_Solar_
Inverter_9301_modbusTCP.csv
2021-02-11 14:25:17:Getting remote changes