Flexitron Webdyn SunPM User Manual

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
78
If the “Check status” is:
The equipment has been found and the current conguration is functional
The device was not found or the current conguration is not functional
Validate the addition of the equipment by clicking on the checkmark at the bottom of the page.
The new equipment then appears in the tree structure on the left side of the screen:
Import a new denition le:
If the desired device is not found in the “Device” drop-down lists, you must import the corresponding
denition le.
To do this, rst click on the button:

Flexitron Webdyn SunPM Specifications

General

Brand	Flexitron
Model	Webdyn SunPM
Category	Controller
Language	English