Flintec DAD143 Series User Manual

DAD 143.x User Manual Profinet Rev.1.1.1 March 2023 Page 66 of 95
13.2.3 NG Network Gateway (Read only)
The NG command can show the actual default gateway address currently in use by the DAD 143.x.
PC sends
DAD 143.x responds
Meaning
NG
G:000.000.000.000
Current default gateway is shown
Factory default: 0.0.0.0
Note: The NG setting can also be viewed from the front panel. Use front panel menu 8.6.
13.2.4 DN Device Name (Read only)
The DN command can show the actual name of station currently in use by the DAD 143.x
PC sends
DAD 143.x responds
Meaning
DN
N:dad143
Factory default: No name
13.2.5 MA MAC Addresses (Read only)
The DAD 143.x is assigned four consecutive MAC addresses during manufacture. These MAC addresses cannot
be changed by the user but they can be inspected using the MA command.
PC sends
DAD 143.x responds
Meaning
MA1
00-02-A2-50-4A-47
Show MAC address 1
MA2
00-02-A2-50-4A-48
Show MAC address 2
MA3
00-02-A2-50-4A-49
Show MAC address 3
MA4
00-02-A2-50-4A-4A
Show MAC address 4

Flintec DAD143 Series Specifications

General

Brand	Flintec
Model	DAD143 Series
Category	Measuring Instruments
Language	English