Need help?Do you have a question about the Flintec FT-111 and is the answer not in the manual?
General| Material | Stainless steel |
|---|---|
| Accuracy class | C3 |
| Rated Output | 2 mV/V |
| Temperature effect on zero | ±0.02% F.S./10°C |
| Insulation resistance | ≥5000 MΩ |
| Safe overload | 150% of Emax |
| Ultimate overload | 300% F.S. |
| Accuracy | C3 |
Provides a general description of the FT-111 weighing terminal and its applications.
Details the technical specifications of the FT-111 weighing terminal, including A/D converter and load cell data.
Describes the physical housing dimensions and design of the FT-111 weighing terminal.
Details available mounting kits for the FT-111, including wall and column options.
Provides essential safety precautions, warnings, and cautions for operating and servicing the FT-111.
Explains the LCD display elements and symbols used on the FT-111.
Details the functions of each key on the FT-111 keypad for operation and programming.
Covers recommendations for environment, cabling, and electrical connections for optimal installation.
Provides a step-by-step guide for installing the FT-111, from preparation to final use.
Describes the procedure for installing optional interface boards for enhanced functionality.
Provides instructions and warnings for cleaning the FT-111 weighing terminal.
Gives guidance on the proper disposal of the FT-111 according to WEEE regulations.
Explains fundamental operations like switching on/off, zeroing, and basic weighing.
Details advanced features such as high resolution, unit change, and average weighing.
Covers backing up and restoring instrument data using an SD card.
Describes how to configure and manage the FT-111 using Flintec's Indface2x software.
Provides instructions for upgrading the FT-111 firmware.
Explains the process of transferring data logged on the SD card to a PC.
Details the functionality and usage of digital inputs for controlling the instrument.
Explains the programmable digital outputs for set points and control signals.
Describes the data structure for continuous output via serial ports.
Details the data format for fast continuous data transmission.
Explains the different printout formats and how to select them.
Covers the EPL format for label printing and design.
Describes the BSI protocol for PC communication and data exchange.
Provides information on optional fieldbus interfaces for process control.
Explains how to enter alphanumeric data for ticket headers and footers.
Guides users on how to access the programming and calibration menus.
Details frequently used parameter blocks for quick setup and service access.
Describes the procedures for saving or discarding changes and exiting programming mode.
Explains the structure and navigation of the programming menu and parameters.
Details configuration parameters for serial and network interfaces.
Covers procedures for scale calibration, zero, and span adjustments.
Provides information related to metrological data and alibi memory.
Explains diagnostic tests and history logging features of the instrument.
Details the process of addressing digital load cells connected to the FT-111.
Explains how to manually address digital load cells.
Describes shift adjustment for improving reading accuracy across the platform.
Illustrates the scale sealing procedure with a sticker for approved scales.
Details the functionality and connection of optional digital I/O boards.
Explains the alibi memory function, its installation, and data recording.
Provides instructions for inserting and removing the SD card for data logging.
Details the BSI protocol for reliable and fast communication with PCs and PLCs.
Describes the Modbus RTU interface for serial communication.
Covers the Ethernet TCP/IP interface for network communication.
Explains the data structure for Modbus TCP/IP communication.
Details the Profibus DP interface, its connection, and configuration.
Describes the Profinet interface, its LEDs, and electrical connection.
Covers the EtherNet/IP interface, its LEDs, and electrical connection.
Details the EtherCAT interface, its LEDs, and electrical connection.
Describes the CC-Link interface, its LEDs, and electrical connection.
Covers the Powerlink interface, its LEDs, and electrical connection.
Details data structures for various fieldbus and network protocols.
Provides the data structure for CANopen communication.
Lists common error codes, their descriptions, and recommended actions.
To Next Page
