Fluke 5502A - Page 224

5502A
Operators Manual
6-32
RTD_TYPE?
Sequential Overlapped
Coupled
IEEE-488 RS-232
x x xx
x
(Resistance Temperature Detector Type query) Shows the Resistance Temperature
Detector (RTD) type used for RTD temperature simulations.
Responses: PT385 (100-ohm RTD, curve α=0.00385 ohms/ohm/°C)
PT385_200 (200-ohm RTD, curve α=0.00385 ohms/ohm/°C)
PT385_500 (500-ohm RTD, curve α=0.00385 ohms/ohm/°C)
PT385_1000 (1000-ohm RTD, curve α=0.00385 ohms/ohm/°C)
PT3926 (100-ohm RTD, curve α=0.003926 ohms/ohm/°C)
PT3916 (100-ohm RTD, curve α=0.003916 ohms/ohm/°C)
CU10 (10-ohm RTD, empirical curve)
NI120 (120-ohm RTD, empirical curve)
Example: RTD_TYPE? shows PT3926
Shows PT3926 when a 100-ohm RTD with curve α=0.003926 ohms/ohm/°C is set as
the RTD type.
RTD_TYPE_D
Sequential Overlapped
Coupled
IEEE-488 RS-232
x x xx
x
(Resistance Temperature Detector Type Default command) Sets the default Resistance
Temperature Detector (RTD) at power on and reset, which is kept in the Calibrator non-
volatile memory. (While saving configuration data in the non-volatile memory, a period
of about 2 seconds, the Calibrator does not respond to remote commands.)
Parameters: PT385 (100-ohm RTD, curve α=0.00385 ohms/ohm/°C)
PT385_200 (200-ohm RTD, curve α=0.00385 ohms/ohm/°C)
PT385_500 (500-ohm RTD, curve α=0.00385 ohms/ohm/°C)
PT385_1000 (1000-ohm RTD, curve α=0.00385 ohms/ohm/°C)
PT3926 (100-ohm RTD, curve α=0.003926 ohms/ohm/°C)
PT3916 (100-ohm RTD, curve α=0.003916 ohms/ohm/°C)
CU10 (10-ohm RTD, empirical curve)
NI120 (120-ohm RTD, empirical curve)
Example: RTD_TYPE_D PT3926
Set the RTD default type to a 100-ohm RTD with curve α=0.003926 ohms/ohm/°C.
RTD_TYPE_D?
Sequential Overlapped
Coupled
IEEE-488 RS-232
x x xx
x
(Resistance Temperature Detector Type Default query) Shows the default Resistance
Temperature Detector (RTD) used at power on and reset.
Responses: PT385 (100-ohm RTD, curve α=0.00385 ohms/ohm/°C)
PT385_200 (200-ohm RTD, curve α=0.00385 ohms/ohm/°C)
PT385_500 (500-ohm RTD, curve α=0.00385 ohms/ohm/°C)
PT385_1000 (1000-ohm RTD, curve α=0.00385 ohms/ohm/°C)
PT3926 (100-ohm RTD, curve α=0.003926 ohms/ohm/°C)
PT3916 (100-ohm RTD, curve α=0.003916 ohms/ohm/°C)
CU10 (10-ohm RTD, empirical curve)
NI120 (120-ohm RTD, empirical curve)
Example: RTD_TYPE_D? shows PT3926