5522A
Operators Manual
4-40
3. Press U to display the TC menus (below).
nn106f.eps
4. The measured temperature appears in the Output Display (below is typical). (The
lower-case m blinks on when a measurement is being taken.)
nn107f.eps
• Meas@TC terminal (Measurement at the front panel TC terminals) Displays the
actual dc voltage at the front panel TC terminals. This is a display only, not a softkey
function.
• TC MENUS (Thermocouple Menus) Opens the submenus supporting thermocouple
To Next Page
Loading...
