810
Users Manual
5-12
Table 5-2 is a list of the Application Settings.
Table 5-2. Application Settings
Option Description
Select
language
Select a language from the drop-down
list.
Select date
format
Select the date format as mm/dd/yyyy
or dd/mm/yyyy from the drop-down list.
Select time
format
Select the time format as 12Hrs or
24Hrs from the drop-down list.
Select unit
format
Select the measurement system as US
or Metric from the first drop-down list.
Next, select the measurement unit from
the second drop-down list.
Click to save changes.
Click to go to the Viewer software Home
page.
Upgrades
Periodically, upgrades are available for the Tester.
Contact Fluke for upgrade availability. If you have
registered your Tester purchase, Fluke automatically
sends you an upgrade notice. For complete instructions
on how to do an upgrade, see “Maintenance.”
Data Transfer
The Viewer software interface lets you easily move data
and files between the Tester and a computer. You can:
• Import the Machine Setup from the Tester to the
Viewer software
• Export the Machine Setup from the Viewer software
to the Tester
• Import the diagnostic data from the Tester to the
Viewer software for enhanced views of the data
• Export diagnostic data
• Export the fault data to a PDF file
Note
You must connect the Tester to a computer to
see the Transfer menu options. The Device
Connectivity field shows the connection status
and the file path. See “PC Connections” for the
instructions on how to connect the Tester to a
computer.
To Next Page
Loading...
