Fluke 810 - Copy an Existing Machine Setup

Operation
Machine Setup
4
4-19
When you save the Machine Setup, the Tester displays:
gbk45.bmp
Table 4-13 is a list of the softkey functions for the Saved
Machine Setup screen.
Table 4-13. Saved Machine Setup Functions
Softkey Function
New Setup
Displays Set up new machine, Copy
Machine Setup, and Change a
Machine Setup options.
Measure
Go to the Measurement screen to take
a measurement from a certain location.
Exit Exit to the Startup screen.
Copy an Existing Machine Setup
When you have multiple machines to test that are
identical to one another, you can create one Machine
Setup and make multiple copies with a unique Machine
Setup name.
1. Push  to view the New Machine Setup
screen options.
Or, push New Machine in the Startup screen to
view the New Machine Setup screen options.