Fluke 810 - Viewer Software System Requirements

810
Users Manual
2-4
General Specifications
Size.........................................................................7.30 in × 2.76 in × 10.52 in (18.56 cm x 7.00 cm x 26.72 cm)
Weight (with battery) ............................................ 4.2 lbs (1.9 kg)
Display ................................................................... ¼ VGA, 320 × 240 Color (5.7 inch diagonal) TFT LCD with LED backlight
Input/Output Connections
Triaxial sensor connection .................................. 4 pin M12 Connector
Single axis sensor connection ............................ BNC Connector
Tachometer connection ...................................... Mini DIN 6 pin Connector
PC connection .................................................... Mini ‘B’ USB (2.0) Connector
Battery
Battery type......................................................... Lithium-ion, 14.8 V, 2.55 Ah
Battery charging time.......................................... 3 hr
Battery discharge time ........................................ 8 hr (under normal conditions)
AC Adapter
Input voltage ....................................................... 100 Vac to 240 Vac
Input frequency ................................................... 50/60 Hz
Operating System .................................................WinCE 6.0 Core
Operating Temperature ........................................32 °F to 122 °F (0 °C to 50 °C)
Storage Temperature ............................................ -4 °F to 140 °F (-20 °C to 60 °C)
Operating Humidity............................................... 10 % to 95 % RH (non-condensing)
Altitude................................................................... 2000 m
IP Rating ................................................................ 54
Agency Approvals
CSA .................................................................... CAN/CSA-C22.2 No 61010-1-04, Pollution Degree 2
CE (Conformite Europeene) ............................... EN 61010-1:2001, EN 60825-1:2007
Australian Mark...................................................Conforms to relevant Australian standards.
Electromagnetic Compatibility ............................ EN 61326-1:2006
Recommended Calibration Interval..................... 2 years