Fluke 810 - Export Machine Setup

Viewer Software
Preferences
5
5-15
2. In the Select Date field, fill in the Start Date and
the End Date. Or, click
and use the calendar
to click on the date.
3. Choose a filter:
• Select ALL to see all the Machine Setups in
the Tester.
• Transferred to see the Machine Setups
already transferred from the Tester to the
Viewer software.
• Not Transferred to see the Machine Setups
not transferred from the Tester to the
Viewer software yet.
4. Click Filter. The Machine Setups show in the
window according to the filter selection. The
Setup name, Setup date, Record status
(Complete or Incomplete), Modified date, and
the Transfer status (Transferred to computer or
not) for each record also shows in the window.
Note
Click the list header to put the items in ascending or
descending order by date.
5. Click the checkbox before the Setup name to
select a Machine Setup.
Note
You cannot select a Machine Setup after it is
transferred.
6. Click
to import the Machine Setups to the
Viewer software. A prompt shows when the
import is done.
gbk90.bmp
7. Click OK.
Export Machine Setup
You can export the Machine Setups from the Viewer
software to the Tester with the Export Machine Setup
submenu. To export the Machine Setups from the Viewer
software:
1. Click Export Machine Setup. The Export
Machine Setup pane shows on the right side of
the window.