810
Users Manual
3-10
5. Push and hold the trigger button of the Tachometer
to start measuring.
6. Hold the trigger button until the RPM value settles
and displays on the Tester.
7. Release the power button to stop measurement.
8. Wait for the short beep that verifies the RPM value
has been acquired.
The Tester automatically turns off the Tachometer.
gbk20.bmp
Laser Safety Precautions
*W Warning
• The Tachometer contains a Class 2 laser
pointer.
• To avoid eye damage, do not point laser
directly at eye or indirectly off reflective
surfaces.
• Use, other than those specified here,
may result in hazardous laser radiation
exposure.
• Do not use Tachometer in a manner not
specified in this document or the
protection provided by the equipment
may be impaired.
• Do not aim the laser beam at people or
animals.
W Caution
• Keep the Tachometer out of the reach of
children.
• Do not open the Tachometer. The
Tachometer has no user serviceable
parts.
• When not in use, always place the
Tachometer in its protective cover.
To Next Page
Loading...
