Frequently Asked Questions
FAQs - Diagnosis
A
A-9
Confirm machine setup values and take
measurements again.
6. What should I do when the Tester diagnoses
more than five serious or extreme faults?
If the Tester diagnoses more than five serious or
extreme faults, it is highly likely that a setup
input value is incorrect and the Tester is possibly
providing misleading diagnoses due to incorrect
information. Re-check the machine setup inputs,
specifically RPM values (if the exact speed is not
known, use the tachometer or view the drive
control panel). Retake the measurement and re-
analyze the data.
7. I would like to learn more about advanced
vibration consulting services. Any
recommendations?
Fluke has partnered with a premier service
provider, Azima DLI, to provide advanced
vibration consulting services. Find them on the
web at www.azimadli.com
or contact them
directly:
Customer Support
Azima DLI
1050 NE Hostmark Street, Suite 101
Poulsbo, WA 98370
USA
Voice: (+1) 360-626-0111 (05:00 – 4:30 PM
Pacific Time Zone)
Fax: (+1) 360-626-0041
Email: support@AzimaDLI.com
To Next Page
Loading...
