MicroLog Plus Chapter 2
135
Interval
Determines the logging interval, or the time
interval between successive data recordings.
The time format is hh:mm:ss. Set the time
setting to select a recording time interval from
etween 10 seconds and 2 hours. For example,
to set a time interval of one hour, five minutes
and thirty seconds, click the hours (hh) and type
1 or use the arrows to select 01, then click the
minutes (mm) and type 5 or use the arrows, and
finally, click the seconds (ss) and type 30 or
select 30 using the arrows.
Timer run
Click the Timer run check box if you want
MicroLog to start recording at a predetermined
time. This option is convenient if you are using
To Next Page
Loading...